938D Portable Hot Tweezers Mini Soldering Station
The 938D Portable Hot Tweezers are a high-power heated parallel design. They have a programmable temperature control and PID technology. A sleep timer shut off if not used in ten…
The 938D Portable Hot Tweezers are a high-power heated parallel design. They have a programmable temperature control and PID technology. A sleep timer shut off if not used in ten…
The Radioddity GD-88 DMR/Analog is a 7W Handheld transceiver. This dual band, dual mode, and dual standby HT contains two independent VFOs. It offers allow dual-band operation on VHF and…
The Yaesu FTM-400XDR C4FM Transceiver has GPS/APRS, and is a 50 watt, dual band transceiver with an improved GPS receiver. Hands-free operation is available by using the optional BU-2 and…
The Palstar AT2K is a 2000 watt manual antenna tuner, it tunes HF and 6 meters. Featuring a newly designed, smaller roller inductor, which allows the AT2K to tune 6…
The Ameritron Al-811 amplifier gives you 600 watts of PEP power to reach those DX stations. The 811A is easy to tune with the two large tuning knobs, and a…
The Yaesu FT5DR Mars Modification is the same as the FT3D. There is one difference. The recessed resistor is deeper then in the FT3D. and is a little harder to…
The Palstar LA-1K LDMOS Amplifier is a 1000W solid-state amplifier. Built with dual LDMOS transistors, they deliver the full 1000 watts with 35 to 50 of drive. It has “RF…
The Yaesu FTM 300DR is a dual band FM/C4FM 50 watt radio. Built with a heavy-duty heat sink for longer talk times. A Yaesu exclusive Funnel Air-Convection Conductor(FACC) which funnels…
Making a K4 to la1k interface cable is not hard if you know the basics. It is just connecting the right wires to the right places and there only 6…
Installing power pole connectors takes patients, and a little practice but they are not hard at all. A little skill comes in when skinning the wire and crimping the connector.…